Cylinder volume：9-285m³
Motor Power：7.5-160KW
Rotary dryer, also known as dryer, is a drying device that heats materials by rotating them back and forth in the dryer. It is mainly used for drying materials with a certain temperature or particle size in mineral processing, building materials, metallurgy, chemical industry and other departments. The rotary dryer adopts a sleeve-in-line structure to shorten the length of the dryer by multiples. The heat dissipation surface is greatly reduced, so that the heat consumption is reduced, and the doubled heat exchange surface greatly improves the thermal efficiency, and can dry various materials. The rotary dryer has strong adaptability to materials, high drying efficiency, and simple and reliable equipment operation, so it is widely used by users.
100% product on-site real shooting, so you can rest assured of your choice!
The equipment has made various technical improvements in the lifting installation system, and adopts a new multi-combined lifting installation, which overcomes the "wind leakage" phenomenon of traditional dryers, has high thermal efficiency, and reduces coal consumption by less than 20%.
The rotary drum of the rotary dryer is made of high-quality stainless steel. The drum is beautiful and smooth, durable, and there is no phenomenon of scratching the fabric; the transmission large and small gears use pins to replace the traditional cast steel gears, reducing maintenance costs and Maintenance time.
It has a wide range of applications and can be used for drying granular materials, materials with strong adhesion and other various materials. It has strong adaptability and good drying effect.
The automatic control device is adopted, and the whole drying process can be completed automatically only by adjusting the time through the control panel, and the operation is simple and reliable.
The main part of the rotary dryer is mainly composed of cylinder, front roller ring, rear roller ring, gear, retaining roller; drag roller, pinion, discharge part, lifting plate, reducer, motor, hot air duct, feeding chute, Furnace and other parts. During the drying operation, when the temperature at the bottom of the rotary dryer equipment reaches 400°C-800°C, the material is fed from the feeding port by the elevator, and is dispersed, broken, and evenly distributed by the dispersing device under the action of gravity. It flows inside the rotary dryer (to ensure the heat exchange effect of the material inside the dryer). The hot gas is generated by the lower hot blast stove, moves from bottom to top, contacts with the material, and transfers heat to the material through heat conduction, convection, radiation and other ways, so that the temperature of the material continues to rise, and the water is continuously evaporated, meeting the water requirements The material is discharged from the lower outlet, and the gas with water vapor is drawn out by the fan through the chimney.
| Specification (diameter x length) (m) | Cylinder volume (m³) | Processing capacity (t/h) | Installation slope (%) | Maximum intake air temperature (℃) | Main motor (kw) | Total weight (t) |
| Φ1.2×8.0 | 9 | 1.9-2.4 | 3-5 | 700-800 | 7.5 | 9 |
| Φ1.2×10 | 11.3 | 2.4-3.0 | 3-5 | 700-800 | 7.5 | 11 |
| Φ1.5×12 | 21.2 | 4.5-5.7 | 3-5 | 700-800 | 15 | 18.5 |
| Φ1.5×14 | 24.7 | 5.3-6.6 | 3-5 | 700-800 | 15 | 19.7 |
| Φ1.5×15 | 26.5 | 5.7-7.1 | 3-5 | 700-800 | 15 | 20.5 |
| Φ1.8×12 | 30.5 | 6.5-8.1 | 3-5 | 700-800 | 18.5 | 21.5 |
| Φ1.8×14 | 35.6 | 7.6-9.5 | 3-5 | 700-800 | 18.5 | 23 |
| Φ2.2×12 | 45.6 | 9.7-12.2 | 3-5 | 700-800 | 22 | 33.5 |
| Φ2.2×14 | 53.2 | 11.4-14.2 | 3-5 | 700-800 | 22 | 36 |
| Φ2.2×16 | 60.8 | 13.0-16.2 | 3-5 | 700-800 | 22 | 38 |
| Φ2.4×14 | 63.3 | 13.5-16.9 | 3-5 | 700-800 | 37 | 45 |
| Φ2.4×18 | 81.4 | 17.4-21.7 | 3-5 | 700-800 | 37 | 49 |
| Φ2.4×20 | 90.4 | 19.3-24.1 | 3-5 | 700-800 | 45 | 54 |
| Φ2.4×22 | 99.5 | 21.2-26.5 | 3-5 | 700-800 | 45 | 58 |
| Φ2.6×24 | 127.4 | 27.2-34.0 | 3-5 | 700-800 | 55 | 73 |
| Φ3.0×20 | 141.3 | 30.1-37.7 | 3-5 | 700-800 | 75 | 85 |
| Φ3.0×25 | 176.6 | 37.7-47.1 | 3-5 | 700-800 | 75 | 95 |
| Φ3.2×25 | 201 | 42.9-53.6 | 3-5 | 700-800 | 90 | 110 |
| Φ3.6×28 | 285 | 60.8-76.0 | 3-5 | 700-800 | 160 | 135 |
Rooted in China, facing the world. Universal Heavy Machinery always takes "sincere customer service" as the source of company development, subdivides customer needs, and provides tailor-made machinery and equipment.
Free on-site survey to ensure that the scheme design is more in line with customer needs and safer
Strong research and development capabilities provide highly customized equipment for special project requirements
Professional installation, commissioning and maintenance to ensure that the operating characteristics of the equipment meet the needs of production
Professionals come to the site to train operators for you until independent operation
Have a complete accessories system to provide you with reliable and fast accessories services
